Cold Rolled Channel


Select your product below

Clear

Studco® Cold Rolled Channel is used for horizontal bracing between studs. Available in standard lengths of 16′, CRC channel is one of the most common bridging methods used to provide resistance to stud rotation and minor axis bending under wind and axial loads.

Can I substitute specified products for Studco products?

Absolutely, our insistence on quality and extensive product testing provide substantial evidence that our products provide equal performance characteristics of alternative framing systems. Further information can be found on our Systems Conformance document.

Why choose Studco?

As an innovative and industry-leading company, Studco provides quality products, solution-based engineering, and hands-on customer service. There are many reasons to choose Studco products for your project, here are some of the many benefits.

Where are Studco products manufactured and what materials are used for?

Studco products are manufactured in Webster, New York. Our products are made from premium quality Steel. They are manufactured within the strictest of tolerances and are structurally sound when installed in accordance with our Design Manual.

View more FAQs

Available Options

Product Code Product Information Width (mm) Design thickness Coating Mils Lb/ft
CRC-3443 3/4" 43 Mils Cold Rolled Channel 3/4" 0.0451 G60 43 Mils 0.24
CRC-3443-G90 3/4" 43 Mils Cold Rolled Channel 3/4" 0.0451 G90 43 Mils 0.24
CRC-3454 3/4" 54 Mils Cold Rolled Channel 3/4" 0.0566 G60 54 Mils 0.4
CRC-3454-G90 3/4" 54 Mils Cold Rolled Channel 3/4" 0.0566 G90 54 Mils 0.4
CRC-11254 1-1/2" 54 Mils Cold Rolled Channel 1-1/2" 0.0566 G60 54 Mils 0.4
CRC-11254-G90 1-1/2" 54 Mils Cold Rolled Channel 1-1/2" 0.0566 G90 54 Mils 0.4
CRC-11243 1-1/2" 43 Mils Cold Rolled Channel 1-1/2" 0.0451 G60 43 Mils 0.35
CRC-11243-G90 1-1/2" 43 Mils Cold Rolled Channel 1-1/2" 0.0451 G90 43 Mils 0.35

Other Products in this system

Studco

Newsletter

News letter in footer section

"(Required)" indicates required fields

This field is for validation purposes and should be left unchanged.